CNC machining
CNC machines cut parts from solid billet: profiles, pockets, bores and faces milled from bar and plate stock.
Machine & fabrication shop · Poughkeepsie, New York
Marine machining, billet to powder coat.
Technical Precision machines and fabricates parts for boats: hardware, brackets, plates, fittings and one-off replacements. CNC machines, punching, press brake bending, welding and wide-belt sanding are all in the shop, and powder coating is done in the same building.
Boats come first here, but the shop also makes parts for cars, aircraft, brewery equipment, scientific instruments and just about anything else made of metal.
Sheet 02 · Marine work
Parts for boats, made in one shop.
Salt water, vibration and sun are hard on hardware. When a bracket cracks, a cleat pulls loose or a part simply isn't made anymore, Technical Precision can machine a new one from solid stock, form and weld it from plate, and finish it with powder coat without it leaving the building.
Parts list · boat parts the shop can make
| Item | Part | Typical process |
|---|---|---|
| 1 | Cleats, chocks & bollards | CNC machining |
| 2 | Rail & stanchion bases | CNC machining, drilling |
| 3 | Transom, electronics & accessory brackets | Punching, bending, welding |
| 4 | Backing plates & mounting plates | Punching, drilling, sanding |
| 5 | Shaft couplings, flanges & spacers | CNC machining, drilling |
| 6 | Hinges, hatch hardware & covers | Punching, bending, welding |
| 7 | Fittings & adapter blocks | CNC machining, tapping |
| 8 | Replacements for parts no longer made | Whatever the part needs |
Sheet 03 · Example parts
Example parts in 3D.
Spin them, switch views and display styles, and read the dimensions. Marine parts come first, followed by a few from the other industries the shop works in.
NOTE These are original example parts designed for this website to show what the shop's processes can make. They are not customer parts or customer drawings.
The 3D view couldn't start in this browser. The part details are still listed here.
Drag to rotate · Right-drag, Shift-drag or two fingers to pan · Pinch or Ctrl + scroll to zoom · Double-click to reset
Sheet 04 · Capabilities
Machined, punched, bent, welded, finished.
Every step from raw stock to a coated part happens under one roof, so a job doesn't bounce between vendors.
Drilling & tapping
Drilled, counterbored, countersunk and tapped holes, from a single mounting hole to a full grid of threaded holes.
Punching
Punching machines put holes, slots and cutouts in sheet metal quickly and repeatably, ready for bending.
Press brake bending
Press brake bending turns flat, punched blanks into brackets, channels, angles and enclosures.
Welding
Welded brackets, frames and assemblies, with gussets, tabs and fittings joined right in the shop.
Wide-belt sanding
A wide-belt sander takes flat parts to a clean, even surface with a straight, uniform grain, and knocks down burrs.
Powder coating
A powder coater in the same building finishes parts in a durable coat, so machined and fabricated parts come back finished from one stop.
Sheet 05 · Routing
From billet to powder coat.
Every job gets a routing: the list of operations it goes through. Pick the steps your part needs, or start from a preset, then send the routing with your quote request.
Presets
| Op | Operation | Description | Use |
|---|---|---|---|
| 010 | Review | Send a drawing, sketch or sample part. Material, quantity and finish are confirmed before work starts. | Always |
| 030 | CNC machine | Billet parts milled from bar or plate on the shop's CNC machines. | |
| 040 | Drill & tap | Holes drilled, counterbored, countersunk and threaded. | |
| 050 | Punch | Holes, slots and cutouts punched in flat sheet. | |
| 060 | Bend | Flanges, angles and channels formed on the press brake. | |
| 070 | Weld | Gussets, tabs, frames and fittings welded together. | |
| 080 | Sand & grain | Flat parts run through the wide-belt sander for an even finish. | |
| 090 | Powder coat | Coated in the same building. No trucking parts across town. | |
| 100 | Final check | Parts checked against your drawing and packed up. | Always |
Sheet 06 · About
A Poughkeepsie machine shop.
Technical Precision Corp. is a machine shop at 22 Commerce St. in Poughkeepsie, New York, in Dutchess County.
The shop runs CNC machines for billet work, alongside punching machines, press brakes, welding and a wide-belt sander. A powder coater works in the same building, so a part can go from raw stock to a finished coat in one stop.
Marine work leads. Past work also includes parts for IBM and for brewery equipment, scientific equipment, aircraft and cars.
- Company
- Technical Precision Corp.
- Address
- 22 Commerce St., Poughkeepsie, NY 12603
- County
- Dutchess County, New York
- President
- David Sauter
- Phone
- (845) 473-0548
- To be added
- Hours
- To be added
- Founded
- To be added
- Equipment
- CNC machines · punching · press brakes · welding · wide-belt sander
- Finishing
- Powder coating in the same building
Sheet 07 · Industries
Boats first. Not boats only.
Marine work leads, but the same machines and the same people make parts for a lot of other trades.
-
Marine
Boat hardware, brackets, plates, fittings and replacement parts. The shop's lead focus.
-
Automotive
Brackets, mounts, plates and one-off parts for cars.
-
Aircraft
Machined and fabricated aircraft parts.
-
Brewery equipment
Parts for brewing systems, machined, welded or fabricated to suit.
-
Scientific equipment
Plates, mounts, enclosures and fixtures for instruments.
-
Anything else
If it's metal and needs machining, forming, welding or coating, ask.
Past work includes parts made for IBM.
Sheet 08 · Request for quote
Request a quote.
Fill this in and it turns into an email you send from your own mail app, so you can attach drawings or photos. Nothing is sent from this page.